HP HP 9000 Series 800t, System Installation Manual

Page: 20 / 33

12
Addendum to D Class Enterprise Servers System Installation Guide
Installation
CAUTION: Two people are highly recommended for this next task.
16 With tray extended hoist computer into position, aligning base with locator pins
in tray. Slide tray and computer into rack and secure at three places with thread-
forming screws (hardware item 22) at rear of tray.
17 Attach the latch panel (item 4) to front of mounting tray using five screws.
18 With the computer positioned into the rack, fasten knurled screws in latch panel
to lower tabs in bezel mount brackets. NOTE: tighten securely.
19 With the computer securely engaged within the rack assembly, check alignment
of top cover (ref Step 10) and tighten all fasteners.
Figure 5. Seismic Rack Installation