SCALE LOG LIN sets the vertical scale to eitlmer log or linear aund, w’ineur mm
log setting, activates
log
scale per division.
SECAM—L
triggers
oum
time SECAM-L video formats. Options 101 nnd 102, or
Option 301 only.
SELECT
AMPLITUD (froun the Auoplitude Correction omenu) allow-s you to
enter or emlit the amplitude value
for an aomplitnde correction factcnr.
Wlmemu
accessed from the Limit-Line menu, SELECT AMPLITUD allows yon to eumtm’r
or edit time anmplitude value for the displayed (upper or lnmwer)
liunmit-linme
segmemut.
SELECT OLT AMPL
allows you to enuter the delta annplitmmde valmme. The
ummid-
aunmpli tunde valmue aumnl time mini ta anmu imlitmude s’almme create tIre utmtmer mm mmml
lower limit-line table entries.
SELECT FREQ
(fronmu
time Amplitmude Correctioum unenu)
ailosvs you to eater mmr
edit the frer~nmencyfor an ammmplitude correction factor. ~Vlmemm
accessed fromu
tIne Li unit— Lime
unenmu
,
SELECT FREQ al lmssvs vomm tnm custer time fremi uneunry salnrc
for a
Inunit-line
segment.
SELECT LWR AMPL
allows you to enter the amn1mlitude vaimne for time lower
Ii numit—li nmm’
segumnenut
-
SELECT MID AMPL
allow-s you to enter the ummid-amnplitmnde
valmme. ‘lire
ummini—amumpli tmmmie
s’almme aurd time
delta
amnphtmmdm’ s’almme create time mm
mimer
aurd
lower Ii
ummit-linme table
eumt ries.
SELECT POINT
allow’s yomu to create or edit an annmplitmmnle correctionu fartmmr.
SELECT PREFX cinanuges the crurrent prefix to the prefix of tIne selected Lie.
SELECT SEGMENT
allow’s yomu to create or edit a linmit-line segmumemut.
SELECT TYPE
accesses the softkey muetmu timmst is used fmmr selecilmug
time
type
of liomit line: a flat line (FLAT), a sloped line
i
SLOPE
),
or a poimnt
)
POINT
).
SELECT UPR AMPL
allow-s
youu
to eunter time anmplitude
value for tine upper
ii
nu
I
t-linme segnneumt
-
Spectrum Analyzer Functions
2-19
