PEAK SEARCH
places a omarker on the higinest amplitude of a trace, amuml
displays the marker’s amplitude and
freqnency.
HP 8592i1 omm/y.
LPnAK
5EARPA) places a uuuarker on tine
highest amplitude of a trace, displays
the marker’s amoplitude and fremuuenry, and accesses the peak
searcin softkey
menu.
PK—PK MEAS
flnds and displays
tine frequency
and aunphtude differemuces
between
tine inighest
and
lowest sigmuals.
PLOT CONFIG
accesses time softkey nuenu that is used to address the plotter
and to select from
jmlotter options. Optiomu
021
or
023 0mm/p.
PLOTTER ADDRESS
allows yon to select time ilP-IB amlmi mess of time imlotter.
Optiomm 021 or 023 only.
PLT__LOC__ allow’s you to
select
time lom:ation (our time page) of a plotter
outpnt. (This key appears ommls’ if
two or four plots per page are selectemi
using PLTS/PG t 2 4
.)
Option 02/ or 023 only.
PLTS/PG 1
2 4
allow’s yomu to choose
a full-page, imaif-page, or qumarter-page
plot
size. Option
021 or 023 only.
POINT
specifies a hinmit value
for time coordinate point and out-of-caurge
values for
time rest of tine liumnit-line segmnemmt.
POWER ON IP LAST determnines time state timat time spectrnnmn analyzer a-ill he
in when time spectrummm analyzer is posvered oum. If POWER ON IP LAST is set
to
11m
(111 is undcrlineml). time state of tine smnectrumn analyzer is tine sanmme as it
is after [ggy Tj is
pressed.
if POWER ON
IP LAST is set to b,AST (LAST is
our miemhined), time state tire spectrmu no ammaly’zc!r was inn wimeum it was luowememi mmff
is recalled.
PRESEL DEFAULT provides a swept
flatness response svithomut preseiector
peaking. PRESEL
DEFAULT
muses the correction factors gemmerated fromu the
CAL YTF self-cahbratiomm rontiume.
uP 8592B, HP 8593.4,
or
iii’ 85954
our/p.
2-16
Spectrum Analyzer Functions
