manualshive.com logo in svg

HP HP 242 G2, Maintenance And Service Manual, Page: 66 / 125

Share
Download
HP HP 242 G2 Maintenance And Service Manual Download Page 66

Fan

Description

Spare part number

Fan (includes cable)

718430-001

Before removing the fan, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 33

) and then remove the following components:

a.

Hard drive (see 

Hard drive on page 34

)

b.

Memory module service cover (see 

Memory module on page 40

)

c.

Optical drive (see 

Optical drive on page 42

)

d.

Keyboard (see 

Keyboard on page 46

)

e.

Top cover (see 

Top cover on page 49

)

Remove the fan:

1.

Close the computer.

2.

Turn the computer upside down, with the front toward you.

3.

Disconnect the fan cable from the system board.

4.

Turn the computer right side up, with the front toward you.

56

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for HP 242 G2






























































































































Reviews:

No comments