Logging Off, Restarting, and Shutting Down the Thin
Client
To restart, shut down, or log off from the thin client, click
Start
>
Shut Down
. From the
Shut Down
dialog box, select the desired action, and then click
OK
.
NOTE:
You may also log off or shut down using the Windows Security dialog box. Press
Ctrl
+
Alt
+
Del
to open the dialog box.
If automatic logon is enabled, when you log off (without shutting down), the thin client immediately logs
on the default user set up in Windows Login Configuration. For instructions for logging on as a different
user, see
Logging On on page 6
.
The following utilities are affected by logging off, restarting, or shutting down the thin client:
●
Enhanced Writer Filter
●
Power Management
●
System Time
Enhanced Write Filter
For detailed information about the Enhanced Write Filter, see
Enhanced Write Filter Manager
on page 36
. If you want to save changes to system configuration settings, you must disable the write
filter cache or issue the
-commit
command during the current boot session. Otherwise, the new settings
will be lost when the thin client is shut down or restarted. Enable the write filter when you no longer want
to make permanent changes
The write filter cache contents are not lost when you log off and on again (as the same or different user).
You may disable the write filter cache after the new logon and still retain the changes.
Only the administrator has write filter disabling privileges.
8
Chapter 3 Configuration
Summary of Contents for gt7720 - Thin Client
