manualshive.com logo in svg

HP G72-a00 - Notebook PC, User Manual, Page: 72 / 127

Share
Download
HP G72-a00 - Notebook PC User Manual Download Page 72

Disposing of a used battery

WARNING!

To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short

external contacts; do not dispose of in fire or water.

For additional information, see the 

Regulatory, Safety and Environmental Notices

 included with this

computer.

Replacing the battery

Computer battery life varies, depending on power management settings, programs running on the
computer, display brightness, external devices connected to the computer, and other factors.

Battery Check notifies you to replace the battery when an internal cell is not charging properly, or when
the battery storage capacity has reached a weak condition. A message refers you to the HP Web site
for more information about ordering a replacement battery. If the battery is possibly covered by an HP
warranty, instructions include a warranty ID.

NOTE:

To ensure that you always have battery power when you need it, HP recommends purchasing

a new battery when the storage capacity indicator turns green-yellow.

62

Chapter 5   Power management

Summary of Contents for G72-a00 - Notebook PC
































































































































Reviews:

No comments