HP G72-a00 - Notebook PC User Manual Download Page 12

Page: 12 / 127

Components

Top components

TouchPad

Component

Description

(1)

TouchPad off indicator

●

When the TouchPad zone is active, the light is off.

●

When the TouchPad zone is inactive, the light is amber.

●

To switch between active and inactive, quickly double-tap the
TouchPad off indicator.

(2)

TouchPad zone

Moves the pointer and selects or activates items on the screen.

(3)

Left TouchPad control

Use the left side of the TouchPad control button like the left button
on an external mouse.

(4)

Right TouchPad control

Use the right side of the TouchPad control button like the right
button on an external mouse.

There is an unmarked scroll zone inside the right edge of the TouchPad. To scroll up and down using
the TouchPad vertical scroll zone, slide your finger up or down along the right edge of the TouchPad.

For more information about TouchPad features, see

Using the TouchPad on page 28

Chapter 1 Features

Summary of Contents for G72-a00 - Notebook PC
































































































































Search results

Summary of Contents for G72-a00 - Notebook PC

Reviews:

HP G72-a00 - Notebook PC, User Manual, Page: 12 / 127

Search results

Summary of Contents for G72-a00 - Notebook PC

Reviews: