80
Displaying RMON event logs
1.
Select
Device
>
RMON
from the navigation tree.
2.
Click the
Log
tab.
Figure 73 Log tab
In this example, event 1 has generated one log, which is triggered because the alarm value
(11779194) exceeds the rising threshold (10000000). The sampling type is absolute.
RMON configuration example
Network requirements
As shown in
, create an entry in the RMON Ethernet statistics table to gather statistics on
GigabitEthernet 1/0/1 with the sampling interval being 10 seconds. Perform corresponding
configurations so that the system logs the event when the number of bytes received on the interface
more than 1000 or less than 100.
Figure 74 Network diagram
Configuration procedure
1.
Configure RMON to gather statistics for GigabitEthernet 1/0/1:
a.
Select
Device
>
RMON
from the navigation tree.
The
Statistics
tab page appears.
b.
Click
Add
.
The page in
appears.
c.
Select
GigabitEthernet1/0/1
from the
Interface Name
list, type
user1
in the
Owner
field,
and click
Apply
.
Summary of Contents for FlexNetwork NJ5000
