HP FlexNetwork NJ5000, User Manual

Page: 323 / 475

311
Figure 332 Add HWTACACS Server page
3.
Configure the server parameters as described in Table 111 .
4.
Click
Apply
.
Table 111 Configuration items
Item Description
Server Type
Select the server type, including:
•
Primary Authentication
.
•
Primary Authorization
.
•
Primary Accounting
.
•
Secondary Authentication
.
•
Secondary Authorization
.
•
Secondary Accounting
.
IP Address
Enter the IP address of the server. This task is required.
The primary server and the secondary server cannot use the same IP
address.
Port
Enter the TCP port number of the server.
If you leave this field blank, the default port number is used.
Key
Confirm Key
Enter the shared key of the server in the
Key
field, and confirm it in the
Confirm Key
field.
The HWTACACS client (the HPE NJ5000 5G PoE+ switch) and HWTACACS
server use the MD5 algorithm to encrypt packets exchanged between them
and use a shared key to verify the packets. Make sure the HWTACACS server
and client use the same shared key for secure communication.
Configuring HWTACACS communication
parameters for the scheme
1.
In the
Common Configuration
area of the
Modify HWTACACS Scheme
page, configure the
username format as described in Table 112 .
2.
Expand the advanced settings, as shown in Figure 333 .