34
Syntax
service-type
{
hsi
|
stb
|
voip
}
undo service-type
Default
The service type is
hsi
for users in an ISP domain.
Views
ISP domain view
Predefined user roles
network-admin
mdc-admin
Parameters
hsi
: Specifies the High Speed Internet (HSI) service. This service is applicable to users that access
the network through 802.1X.
stb
: Specifies the Set Top Box (STB) service. This service is applicable to users that access the
network through STB.
voip
: Specifies the Voice over IP (VoIP) service. This service is applicable to users that access the
network through IP phones.
Usage guidelines
When the HSI service is specified, the multicast feature of the access module is disabled to save
system resources.
When the STB service is specified, the multicast feature of the access module is enabled to improve
the performance of the multicast module.
When the VoIP service is specified, the QoS module increases the priority of voice traffic to reduce
the transmission delay for IP phone users.
For 802.1X users, the system uses the HSI service forcibly even if the STB or VoIP service is
specified.
You can configure only one service type for an ISP domain.
Examples
# Specify the STB service for users in ISP domain
test
.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] service-type stb
session-time include-idle-time
Use
session-time include-idle-time
to configure the device to include the idle timeout period in the
user online duration sent to the server.
Use
undo session-time include-idle-time
to restore the default.
Syntax
session-time include-idle-time
undo session-time include-idle-time
Default
The device excludes the idle timeout period from the user online duration sent to the server.
