47
HPE 5510 48G 4SFP+ HI
Figure 52 HPE 5510 48G 4SFP+ HI front panel
(1) 10/100/1000Base-T autosensing Ethernet port
(2) 10/100/1000Base-T autosensing Ethernet port
LED
(3) Management Ethernet port
(4) Console port (CONSOLE)
(5) Mini USB console port
(6) Port LED mode switching button
(7) USB port
(8) System status LED (SYS)
(9) SFP+ port
(10) LED for the port LED mode (MODE)
(11) Interface card status LED (SLOT)
(12) Power supply 2 status LED (PWR2)
(13) Power supply 1 status LED (PWR1)
(14) SFP+ port LED
(15) Management Ethernet port LED
Figure 53 HPE 5510 48G 4SFP+ HI rear panel
(1) Grounding screw
(2) Interface card (optional)
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2 (optional)
The HPE 5510 48G 4SFP+ HI switch comes with power supply slot 1 empty and power supply slot 2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
this figure, two PSR150-A1 (JD362B) AC power supplies are installed in the power supply slots. For
more information about installing and removing a power supply, see "
."
The HPE 5510 48G 4SFP+ HI switch comes with a filler panel in the interface card slot. You can
select an interface card for the switch as required. In this figure, an LSWM2SP2PM interface card is
installed in the interface card slot. For more information about installing and removing an interface
card, see "
Installing/removing an interface card
."
1
2
3
4
5
6
