54
USB port
The switch has one OHCI-compliant USB 2.0 port that can upload and download data at a rate up to
480 Mbps. You can use this USB port to access the file system on the Flash of the switch, for
example, to upload or download application and configuration files.
The USB port supplies power as per USB 2.0 specifications. Use only USB 2.0-compliant USB
devices for the USB port. The port might not identity USB devices that are not compliant with USB
2.0.
NOTE:
USB devices from different vendors vary in compatibilities and drivers. Hewlett Packard Enterprise
does not guarantee correct operation of USB devices from other vendors on the switch. If a USB
device fails to operate on the switch, replace it with one from another vendor.
SFP+ port
The switch provides two SFP+ ports. The SFP+ ports support the following transceiver modules and
cables:
•
10-Gigabit SFP+ transceiver modules in
•
10-Gigabit SFP+ copper cables in
•
10-Gigabit SFP+ copper cables in
•
Gigabit SFP transceiver modules in
Table 17 10-Gigabit SFP+ transceiver modules available for the SFP+ ports
Product
Code
Description
Central
wavelength
(nm)
Fiber
diameter (µm)
Multimode
fiber modal
bandwidth
(MHz*km)
Maximum
transmission
distance
JD092B
HPE X130 10G
SFP+ LC SR
Transceiver
850
50/125
2000
300 m (984.25 ft)
500
82 m (269.03 ft)
400
66 m (216.54 ft)
62.5/125
200
33 m (108.27 ft)
160
26 m (85.30 ft)
JD094B
HPE X130 10G
SFP+ LC LR
Transceiver
1310
9/125
N/A
10 km (6.21 miles)
JL250A
HPE X130 10G
SFP+ LC LH80
tunable
Transceiver
1528.773~15
66.723
9/125
N/A
80 km (49.71 miles)
Table 18 10-Gigabit SFP+ copper cables available for the SFP+ ports
Product Code
Description
Cable length
JD095C
HPE X240 10G SFP+ SFP+ 0.65m DA Cable
0.65 m (2.13 ft)
JD096C
HPE X240 10G SFP+ SFP+ 1.2m DA Cable
1.2 m (3.94 ft)
