HP FlexFabric 5950 Series Configuration Manual Download Page 348

Page: 348 / 487

338

Step

Command

Remarks

Enter system view.

system-view

N/A

Configure a VLAN as an
IPv6 multicast VLAN and
enter its view.

ipv6
multicast-vlan vlan-id

By default, a VLAN is not an IPv6
multicast VLAN.

Assign the specified VLANs
to the IPv6 multicast VLAN
as sub-VLANs.

subvlan

vlan-list

By default, an IPv6 multicast VLAN does
not have any sub-VLANs.

Configuring a port-based IPv6 multicast VLAN

You can assign only Layer 2 Ethernet interfaces or Layer 2 aggregate interfaces as user ports to an
IPv6 multicast VLAN.

Configuration prerequisites

Before you configure a port-based IPv6 multicast VLAN, complete the following tasks:

•

Create VLANs as required.

•

Enable MLD snooping for the VLAN to be configured as the IPv6 multicast VLAN.

•

Enable MLD snooping for all the VLANs that contain the multicast receivers.

Configuring user port attributes

Step

Command

Remarks

Enter system view.

system-view

N/A

Enter interface view.

interface

interface-type

interface-number

N/A

Configure the link type of the
user port as hybrid.

port link-type hybrid

The default setting is

access

For more information about this
command, see

Layer 2—LAN

Switching Command Reference.

Specify the PVID of the
current user port as the
VLAN to which the user port
belongs.

port hybrid pvid vlan

vlan-id

By default, the PVID for a hybrid
port is VLAN 1.

For more information about this
command, see

Layer 2—LAN

Switching Command Reference.

Configure the current user
port to permit IPv6 multicast
VLAN and to untag the
packets.

port hybrid
vlan

vlan-id-list

untagged

By default, a hybrid port permits
only VLAN 1.

For more information about this
command, see

Layer 2—LAN

Switching Command Reference.

Assigning user ports to an IPv6 multicast VLAN

You can assign user ports to an IPv6 multicast VLAN in IPv6 multicast VLAN view or assign a user
port to an IPv6 multicast VLAN in interface view.

Summary of Contents for FlexFabric 5950 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for FlexFabric 5950 Series

Reviews:

Related manuals for FlexFabric 5950 Series

Brands by name

Popular brands

HP FlexFabric 5950 Series, Configuration Manual

Search results

Summary of Contents for FlexFabric 5950 Series

Reviews:

Related manuals for FlexFabric 5950 Series

Brands by name

Popular brands