Remarks
Parameter value
Parameter name/type
By default, the number of concurrent
logins is not limited for the local user.
access-limit max-user-number 16
recommended
Upper limit of concurrent logins using
the same user name
This command takes effect only when
local accounting is configured for the
local user. It does not apply to FTP,
SFTP, or SCP users who do not support
accounting.
Configure the maximum login attempts
and the action to take if there is a login
Depends on environment
Configure password control attributes
for the local user.
failure: password-control login-attempt
login-times [ exceed { lock | lock-time
time | unlock } ]
By default, broadcast traffic is allowed
to pass through an interface.
broadcast-suppression { ratio | pps
max-pps | kbps max-kbps }
Enable broadcast suppression and set
the broadcast suppression threshold.
By default, multicast traffic is allowed
to pass through an interface.
multicast-suppression { ratio | pps
max-pps | kbps max-kbps }
Enable multicast suppression and set
the multicast suppression threshold.
By default, unknown unicast traffic is
allowed to pass through an interface.
unicast-suppression { ratio | pps
max-pps | kbps max-kbps }
Enable unknown unicast suppression
and set the unknown unicast
suppression threshold.
By default, a screen displays a
maximum of 24 lines. A value of 0
screen-length screen-length
Set the maximum number of lines to
be displayed on a screen.
disables pausing between screens of
output.
Changing this setting does not affect
online users. If the current number of
aaa session-limit telnet max-sessions
default=16
Set the maximum number of concurrent
Telnet users.
online Telnet users is equal to or greater
than the new setting, no additional
Telnet users can log in until online users
log out.
25
