43
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter ISP domain view.
domain
isp-name
N/A
3.
Place the ISP domain in active
or blocked state.
state
{
active
|
block
}
By default, an ISP domain is in
active state, and users in the
domain can request network
services.
4.
Specify an authorization user
profile for authenticated users
in the ISP domain.
authorization-attribute
user-profile
profile-name
By default, no user profile is
specified.
Configuring authentication methods for an ISP domain
Configuration prerequisites
Before configuring authentication methods, complete the following tasks:
1.
Determine the access type or service type to be configured. With AAA, you can configure an
authentication method for each access type and service type.
2.
Determine whether to configure the default authentication method for all access types or service
types. The default authentication method applies to all access users. However, the method has a
lower priority than the authentication method that is specified for an access type or service type.
Configuration guidelines
When configuring authentication methods, follow these guidelines:
•
If a RADIUS scheme is used for authentication but not for authorization, AAA accepts only the
authentication result from the RADIUS server. The Access-Accept message from the RADIUS server
also includes the authorization information, but the device ignores the information.
•
To specify a scheme for user role authentication, make sure the user role is in the format of
level-
n
.
If an HWTACACS scheme is specified, the device uses the entered username for role authentication.
If a RADIUS scheme is specified, the device uses the username
$enab
n
$
on the RADIUS server for
role authentication. The variable
n
has the same value as the variable
n
in the target user role
level-
n
.
Configuration procedure
To configure authentication methods for an ISP domain:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter ISP domain view.
domain
isp-name
N/A
3.
Specify the default
authentication method for
all types of users.
authentication default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name
] [
local
] [
none
] |
ldap-scheme
ldap-scheme-name
[
local
]
[
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name
] [
local
] [
none
] }
By default, the default
authentication method is
local
.
The
none
keyword is not
supported in FIPS mode.
