140
Figure 45
Port group configuration
c.
Enter the port group name.
d.
Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address group.
e.
Click
OK
.
5.
Select
Access Service
>
Service Parameters
>
Validate System Configuration
from the navigation
tree to validate the configurations.
Configuring the portal authentication server on IMC PLAT 5.0
In this example, the portal server runs on IMC PLAT 5.0(E0101) and IMC UAM 5.0(E0101).
1.
Configure the portal authentication server:
a.
Log in to IMC and click the
Service
tab.
b.
Select
User Access Manager
>
Portal Service Management
>
Server
from the navigation tree to
enter the portal server configuration page, as shown in
.
c.
Configure the portal server parameters as needed.
This example uses the default settings.
d.
Click
OK
.
