1
Preparing for installation
The HP FlexFabric 11900 Switch Series includes only the 11908-V model.
Table 1
HP FlexFabric 11900 Switch Series models
Product code
HP description
RMN
JG608A
HP FlexFabric 11908-V Switch Chassis
BJNGA-AC0003
IMPORTANT:
For regulatory identification purposes, HP FlexFabric 11900 switches are assigned regulatory model
numbers (RMN). These regulatory numbers should not be confused with the marketing name, for example
HP FlexFabric 11908-V Switch Chassis, or product code, for example JG608A.
Safety recommendations
To avoid possible bodily injury and equipment damage, read all safety recommendations carefully
before installation. Note that the recommendations do not cover every possible hazardous condition.
General safety recommendations
•
Keep the chassis clean and dust-free.
•
Do not place the switch on a moist area, and avoid liquid flowing into the switch.
•
Make sure the ground is dry and flat and anti-slip measures are in place.
•
Keep the chassis and installation tools away from walk areas.
•
Do not wear loose clothing, jewelry (for example, necklace) or any other things that could get
caught in the chassis when you install and maintain the switch.
Electricity safety
•
Clear the work area of possible electricity hazards, such as ungrounded power extension cables,
missing safety grounds, and wet floors.
•
Locate the emergency power-off switch in the room before installation so you can quickly shut power
off when an electrical accident occurs.
•
Unplug all external cables, including power cords, before moving the chassis.
•
Do not work alone when the switch has power.
•
Never assume that power has been disconnected from a circuit. Always check.
Summary of Contents for FlexFabric 11908-V
Page 6: ...iv Index 97 ...
Page 78: ...72 ...
