HP FC Switch Surestore 6164, Reference Manual

Page: 121 / 236

Using Fabric Manager 121
Rename Zone Click to edit the name of the zone selected in the Zone
Name field. A dialog displays in which you can edit the
name of the zone.
Member
Selection List A list of potential zone members, including switches,
ports, WWNs, aliases, and QuickLoop AL_PAs.
Add Member Click to add the member selected in the Member
Selection List to the Zone Members list. If an entire
switch is selected, all ports on the switch are added to the
zone. You can also select individual ports. To add a
device WWN, select either a node WWN (folder icon) or
port WWN (blue circle icon) from the WWN sub-tree.
To add an alias to the zone, select it from the Alias
sub-tree (the alias must already exist).
Remove
Member Click to remove the selected member from the [Zone
name] Members list.
Add Other Click to add a WWN, switch, port, or QuickLoop
AL_PA that is not listed in the Member Selection List.
[Zone name]
Members The members of the zone selected in the Zone Name
field. The name of this list depends on the name of the
selected zone. If no zone is selected, the name displays as
“null Members.”
Apply Click to apply all changes made since Zone
Administration View was opened, including changes
made on other tabs in the view. Changes cannot be
cancelled after they are applied.
Cancel Click to cancel all changes since the changes were last
applied and to exit Zone Administration. Changes cannot
be cancelled after they are applied.
Done Click to apply all changes made since Zone
Administration View was opened, and to exit Zone
Administration View.