11
2.3
Connecting to Power
Use only the supplied car adapter to power up the camcorder and charge
the built-in battery.
1.
Connect one end of the car adapter to the USB connector of the
camcorder.
2.
Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on.
Note:
1. Red LED light indicates the battery is charging; when devices are connecting power cord to charge
and the red light flashes, it indicates the device temperature is too high and should unplug the power
cord immediately.
2. Please take note if the environment temperature reaches 45°C or above, the car adapter still can
supply power to camcorder, but it may not charge the battery. This is characteristic of Lithium
polymer battery and is not a malfunction.
