Step 5.
Making sure that your battery is facing the right direction, connect the new battery by pressing the connector at the end of
the ribbon cable into the socket as shown. Note the location of the prongs in the socket of the Jornada and the location of
the plugs for the prongs on the battery connector, and connect them accordingly. Do not press too hard or try to force the
pieces together. They will fit easily when correctly aligned. Place the new battery in its seat.
Step 6.
Press the back cover of the Jornada on over the new battery, making sure that the scroll wheel shows through (as
shown), and screw the four screws back in. FULLY CHARGE your new battery before use. (Allow at least three hours. For
quality control, we pre-charge many of our batteries, so yours may require less time.)
PLEASE NOTE: Our tools fit the majority of Jornadas, but some devices may have different screws installed for
various reasons. If our tools do not fit your device, you may have the appropriate tool in a tool kit you already
own. You can also check your local hardware or electronics store if you do not have the right tool at home.
