TouchPad assembly
Description
Spare part number
TouchPad assembly
818040-001
Touchpad support bracket
818042-001
Touchpad cable
818041-001
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 35
).
5.
Remove the battery (see
Battery on page 54
).
6.
Remove the hard drive (see
Hard drive on page 55
).
7.
Remove the speakers (see
Speakers (front) on page 57
).
Remove the TouchPad:
1.
Disconnect the TouchPad cable from the TouchPad (1).
2.
Remove the TouchPad (2) cable from the computer.
3.
Remove the seven Phillips PM2.0×3.0 screws (1) that secure the TouchPad bracket to the computer.
64
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
