Solid-state drive
Table 5-3
Solid-state drive description and spare part number information
Description
Spare part number
1-TB, PCle, NVMe solid-state drive with TLC
L53562-001
512-GB, PCIe, NVMe, solid-state drive with TLC
L53563-001
512-GB, PCIe, NVMe, solid-state drive
L53566-001
512-GB, PCle, NVMe +32-GB solid-state drive with X point
L53567-001
256-GB, PCIe, NVMe, solid-state drive with TLC
L53564-001
256-GB, PCIe, NVMe, value solid-state drive
L53565-001
128-GB, M.2, SATA-3 solid-state drive with TLC
L53872-001
Solid-state drive shield
L53567-001
Before removing the solid-state drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
).
5.
Remove the battery (see
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0×3.8 screw (1) that secures the solid-state drive to the system board.
Component replacement procedures
31
Summary of Contents for ENVY x360 15
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
