manualshive.com logo in svg

HP Envy 15, User Manual

Share
Download
HP Envy 15 User Manual Download Page 77

To remove a USB device:

1.

Click the 

Safely Remove Hardware and Eject Media

 icon in the notification area, at the far right

of the taskbar.

NOTE:

To display the Safely Remove Hardware and Eject Media icon, click the 

Show hidden

icons

 icon (the arrow at the left of the notification area).

2.

Click the name of the device in the list.

NOTE:

You are prompted that it is safe to remove the hardware device.

3.

Remove the device.

Using an eSATA device

An eSATA port connects an optional high-performance eSATA component, such as an eSATA external
hard drive.

Some eSATA devices may require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the manufacturer's instructions.

NOTE:

The eSATA port also supports an optional USB device.

Connecting an eSATA device

CAUTION:

To prevent damage to an eSATA port connector, use minimal force to connect an eSATA

device.

▲

To connect an eSATA device to the computer, connect the eSATA cable for the device to the
eSATA port.

You will hear a sound when the device has been detected.

Removing an eSATA device

CAUTION:

To prevent loss of information or an unresponsive system, use the following procedure to

safely remove the device.

External devices

67

Summary of Contents for Envy 15




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands