HP EliteBook x360 1040 G5, Maintenance And Service Manual

Page: 55 / 110

Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-3 Solid-state drive descriptions and part numbers
Description Spare part number
2 TB, M.2 2280, PCIe-NVMe 3×4, SS solid-state drive with TLC L85358-005
1 TB, M.2 2280, PCIe-NVMe 3×4, SS solid-state drive with TLC L85348-005
512 GB, M.2 2280, PCIe-3×4, SS solid-state drive with TLC L85360-005
512 GB, M.2 2280, PCIe, NVMe, SED solid-state drive with TLC L85368-005
512 GB, M.2 2280, PCIe, NVMe, value solid-state drive L85364-005
256 GB, M.2 2280, PCIe-3×4, SS solid-state drive with TLC L85350-005
256 GB, M.2 2280, PCIe, NVMe, SED solid-state drive with TLC M07245-005
256 GB, M.2 2280, PCIe, NVMe, value solid-state drive L85354-005
128 GB, M.2 2280, SATA-3 solid-state drive with TLC L85346-005
512 GB, M.2 2280, PCIe + 32 GB, 3D Xpoint solid-state drive L85366-005
256 GB, M.2 2280, PCIe + 16 GB, 3D Xpoint solid-state drive L85356-005
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 44 ).
2. Remove the bottom cover ( Bottom cover on page 44 ).
3. Disconnect the battery cable from the system board the battery (see Battery on page 45 ).
Remove the solid-state drive:
1. Remove the solid-state drive from the system board.
NOTE: The solid-state drive shield is not available as a spare part.
ENWW Component replacement procedures 47