manualshive.com logo in svg

HP EliteBook Folio 1040 G2, Maintenance And Service Manual, Page: 8 / 127

Share
Download
HP EliteBook Folio 1040 G2 Maintenance And Service Manual Download Page 8

Backing up your information ............................................................................................................. 86

Performing a system recovery ............................................................................................................................  87

Using the Windows recovery tools .................................................................................................... 87
Using f11 recovery tools (select models only) .................................................................................  88
Using Windows 7 operating system media ....................................................................................... 88

12  Backup and recovery in Windows 8.1 ...........................................................................................................  90

Backing up your information ............................................................................................................................... 90
Performing a system recovery ............................................................................................................................  90

Using the Windows recovery tools .................................................................................................... 90
Using f11 recovery tools ...................................................................................................................  91
Using Windows operating system media (purchased separately) ...................................................  92
Using Windows Refresh or Windows Reset ......................................................................................  92
Using HP Software Setup ..................................................................................................................  92

13  Backup and recovery in Windows 10 ............................................................................................................  93

Creating recovery media and backups ................................................................................................................  93

Creating HP Recovery media (select products only) ......................................................................... 93

Using Windows tools ...........................................................................................................................................  94
Restore and recovery ........................................................................................................................................... 95

Recovering using HP Recovery Manager ........................................................................................... 95

What you need to know before you get started ............................................................. 95
Using the HP Recovery partition (select products only) ................................................. 96
Using HP Recovery media to recover .............................................................................. 96
Changing the computer boot order ................................................................................  97
Removing the HP Recovery partition (select products only) .........................................  97

14  Backing up, restoring, and recovering in Ubuntu Linux .................................................................................. 98

Creating a restore image .....................................................................................................................................  98

Creating restore image on DVDs .......................................................................................................  98
Creating a restore image on a USB device ........................................................................................  98
Restoring the original factory state .................................................................................................. 99

Backing up your data files .................................................................................................................................  100
Restoring your data files ...................................................................................................................................  100

15  Specifications .......................................................................................................................................... 101

Computer specifications .................................................................................................................................... 101
35.6-cm (14.0-in) HD+ display specifications ................................................................................................... 102
35.6-cm (14.0-in) FHD display specifications ................................................................................................... 103
M.2 solid-state drive specifications ..................................................................................................................  104

viii

Summary of Contents for EliteBook Folio 1040 G2
































































































































Reviews:

No comments