background image

Creating recovery media with HP Recovery Disc Creator

HP Recovery Disc Creator is a software program that offers an alternative way to create recovery

media. After you successfully set up the computer, you can create recovery media using HP Recovery

Disc Creator. This recovery media allows you to reinstall your original operating system as well as

select drivers and applications if the hard drive becomes corrupted.

HP Recovery Disc Creator can create two kinds of recovery DVDs as follows:

Windows DVD—Installs the operating system without additional drivers or applications.

Driver DVD—Installs specific drivers and applications only, in the same way that the HP Software

Setup utility installs drivers and applications.

Creating recovery media

NOTE:

The Windows DVD can be created only once. Thereafter, the option to create that media will

not be available.

1.

Select 

Start > All Programs > Productivity and Tools > HP Recovery Disc Creator

.

2.

Select 

Driver DVD

 or 

Windows DVD

.

3.

From the drop-down menu, select the drive for burning the recovery media.

4.

Click the 

Burn

 button to start the burning process.

Backing up your information

Recovery after a system failure is as good as your most recent backup. Immediately after setting up the

computer, you should create system repair discs (select models only) using the installed optical drive

(select models only) or an optional external optical drive and back up your system. As you add new

software and data files, you should continue to back up your system on a regular basis to maintain a

reasonably current backup. The system repair discs (select models only) are used to start up (boot) the

computer and repair the operating system in case of system instability or failure. Your initial and

subsequent backups allow you to restore your data and settings if a failure occurs.

You can back up your information to an optional external hard drive, a network drive, or discs.

Note the following when backing up:

Store personal files in the Documents library, and back it up regularly.

Back up templates that are stored in their associated programs.

Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot

of your settings. The screen shot can be a time-saver if you have to reset your preferences.

When backing up to discs, use any of the following types of discs (purchased separately): CD-R,

CD-RW, DVD+R, DVD+R DL, DVD-R, DVD-R DL, or DVD±RW. The discs you use will depend on the

type of optical drive you are using.

162

Chapter 7   Backup and recovery

Summary of Contents for EliteBook 8570w






















































































































































































Reviews: