HP EliteBook 845 Maintenance And Service Manual Download Page 72

Page: 72 / 117

Detach the RTC battery (3) from the top cover/keyboard. (The RTC battery is attached to the top cover/

keyboard with double-sided adhesive.)

Remove the RTC battery.

To install the RTC battery, reverse the removal procedure.

NFC module cable

To remove the NFC module cable, use this procedure and illustration.

NOTE:

The NFC module cable is included in the Cable Kit, spare part number N18760-001.

Before removing the NFC module cable, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 39

Remove the bottom cover (see

Bottom cover on page 39

Remove the battery (see

Battery on page 41

Remove the NFC module cable:

Release the ZIF connector (1) to which the NFC module cable is connected, and then disconnect the NFC

module cable from the system board.

Release the ZIF connector (2) to which the NFC module cable is connected, and then disconnect the NFC

module cable from the NFC module.

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for EliteBook 845






















































































































Search results

Summary of Contents for EliteBook 845

Reviews:

Related manuals for EliteBook 845

Brands by name

Popular brands

HP EliteBook 845, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 845

Reviews:

Related manuals for EliteBook 845

Brands by name

Popular brands