HP EliteBook 845, Maintenance And Service Manual

Page: 51 / 117

Table 5-4 Memory module description and part numbers (continued)
Description Spare part number
Memory module shield: The memory module shield is available using spare part number N18250-001.
Before removing the memory modules, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 39 ).
2. Remove the bottom cover (see Bottom cover on page 39 ).
3. Disconnect the battery cable from the system board (see Battery on page 41 ).
If you are replacing a memory module, remove the existing memory module:
1. Release the grounding tape (1) that secures the memory module shield to the heat sink and the solid-state
drive shield.
2. Use the tabs (2) on the memory module shield to lift and remove the shield (3) from the computer.
The memory module shield is available using spare part number N18250-001.
When installing the memory module shield, be sure that the edges of the shield fit into all the clips (4) that
are built into the system board.
Memory modules 45