HP ELITEBOOK 840 G4 Page 67 Maintenance And Service Manual Download

Page: 67 / 116

Touchpad board

Description

Spare part number

Touchpad board without NFC antenna

821171-001

Touchpad board with NFC antenna

821172-001

Before removing the touchpad board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.

Remove the bottom cover (see

Bottom cover on page 32

Remove the battery (see

Battery on page 36

Remove the keyboard (see

Keyboard on page 47

Remove the internal base plate (see

Internal base plate on page 50

Remove the touchpad board:

Disconnect the cable from the touchpad to the smart card reader board (1), and then disconnect the NFC
antenna from the NFC module (2).

Lift the tape (3), and then remove the 2 Phillips M2.5x2.5 screws (4) that secure the touchpad button
board to the computer.

Lift the top of the touchpad board up, and then pull it forward to remove it from the computer (5).

Reverse this procedure to install the touchpad board.

Component replacement procedures

Summary of Contents for ELITEBOOK 840 G4





















































































































Search results

Summary of Contents for ELITEBOOK 840 G4

Reviews:

Related manuals for ELITEBOOK 840 G4

Brands by name

Popular brands

HP ELITEBOOK 840 G4, Maintenance And Service Manual

Search results

Summary of Contents for ELITEBOOK 840 G4

Reviews:

Related manuals for ELITEBOOK 840 G4

Brands by name

Popular brands