Fingerprint reader board
Description
Spare part number
Fingerprint reader board
651364-001
Before removing the fingerprint reader board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
), and then remove the following components:
a.
Service access cover (see
Service access cover on page 42
.)
b.
Keyboard (see
Keyboard on page 62
.)
c.
Base enclosure (see
Base enclosure on page 66
.)
d.
Top cover (see
Top cover on page 71
.)
Remove the fingerprint board:
1.
Remove the Phillips M2.0x3.0 screw
(1)
from fingerprint reader frame, and then remove the
frame
(2)
.
2.
Remove the tape
(3)
from fingerprint reader cable, and then remove the board and cable
(4)
from the top cover.
Reverse this procedure to install the fingerprint reader board.
Component replacement procedures
75
Summary of Contents for EliteBook 2560p
