Weight & Dimensions
Chassis Dimensions
(H x W x D)
15.14 x 7.27 x 16.36 in
385 x 185 x 416 mm
Packaged Dimensions
(L x W x H)
19.13 x 21.875 x 10.13 in
490 x 556 x 257 mm
System Weight
22.4 lb (10.2 kg)
Shipping Weight
30.8 lb (14.0 kg)
Technology and Features Memory Type
PC3-10600 DDR3 (1333 MHz) non-ECC
Up to 16 GB system memory standard
NOTE:
For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory
may not be available due to system resource requirements. Addressing memory above 4 GB requires a 64-
bit operating system.
Hard Drive Interfaces
Supported
Serial ATA
RAID
Redundant Array of Independent Drives
RAID 0,1 are the RAID configurations that HP Elite 7100 Microtower PC products offer as factory
configurations. The pre-configured systems:
Are complete RAID systems and have both drives installed.
Have the necessary Option ROM configuration.
Are pre-loaded and pre-installed with all required Intel software.
Include a preinstalled operating system that is in mirrored mode out of the box.
SMART Technology
*
(Self-Monitoring, Analysis
and Reporting Technology)
Allows hard drives to monitor their own health and to raise flags if imminent failures were predicted
Predicts failures before they occur. Tracks fault prediction and failure indication parameters such as
re-allocated sector count, spin retry count, calibration retry count
By avoiding actual hard drive failures, SMART hard drives act as "insurance" against unplanned user
downtime and potential data loss from hard drive failure
IOEDC: I/O Error Detection Circuitry
Detects errors in Read/Write buffers on HDD cache RAM
Interface in F10 setup provides confirmation of SMART support.
* This feature is inoperable when a RAID configuration is enabled.
QuickSpecs
HP Elite 7100 Microtower PC
System Details
DA - 13571 North America — Version 3 — June 8, 2010
Page 7
