DDR3 SYNCH DRAM NON-ECC MEMORY
The Intel H57 chipset supports non-ECC DDR3 memory up to PC3-16000 (1333-MHz). Memory upgrades are accomplished by adding
single or multiple DIMMs of the same or varied sizes. This chart does not represent all possible memory configurations.
CAUTION: You must shut down the computer and disconnect the power cord before adding or removing memory modules. Regardless of
the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to an active AC outlet.
Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board.
HP recommends dual-channel symmetric configurations for maximum performance.
For best performance, add the same amount of total memory to each channel and do not mix speeds. For dual-channel symmetric
performance, the total amount of memory in each channel must be equal. If speeds are mixed, speed will default to the slowest DIMM.
STANDARD MEMORY
1-GB, 2-GB or 4GB DDR3 SYNCH DRAM
OPTIONAL MEMORY UPGRADES
Supports up to 16-GB of DDR3 SYNCH DRAM. Not all memory configurations possible are represented below.
NOTE:
For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available due to
system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.
DIMM Size
Slot 1 (Black)
Slot 2 (Blue)
Slot 3 (Black)
Slot 4 (Blue)
1-GB
1-GB
2-GB (dual-channel symmetric)
1-GB
1-GB
4-GB (dual-channel symmetric)
1-GB
1-GB
1-GB
1-GB
4-GB (dual-channel symmetric)
2-GB
2-GB
8-GB (dual-channel symmetric)
2-GB
2-GB
2-GB
2-GB
16-GB (dual-channel symmetric)
4-GB
4-GB
4-GB
4-GB
QuickSpecs
HP Elite 7100 Microtower PC
Memory
DA - 13571 North America — Version 3 — June 8, 2010
Page 14
