7.
Reboot the system.
For HP-UX 11iv3 (11.31)
1.
Start up the SMH web-based interface.
% smh –w
This will attempt to launch a web browser. Mozilla browser
2
is the default when HP-UX 11i v3
is installed.
2.
From the SMH Tools page, select Modules from the Kernel Configuration section:
Figure 3 SMH web-based interface (HP-UX11i v3)
.
3.
In the Search box on the Kernel Configuration page, type
stape
and execute the search. The
search results list will include both
estape
and
stape
modules. If either of these modules is not
installed both Current State and Next Boot State will be shown as “unused”. A state of “static”
indicates that the module is installed.
4.
Select the
estape
module
3
radio button. Its details will appear in a panel below the modules
list. From the right hand panel on the web page, click the
Modify Module
link.
2
If Mozilla is being invoked for the first time you may be asked to agree to license terms for the software.
3
The
estape
and
stape
modules are linked, so it is sufficient to select the
estape
module alone for installation.
Volume 5: UNIX, Linux and OpenVMS configuration guide
11
