8.
Using a Torx screwdriver, remove the six T-15 Torx screws and remove the front panel board.
1
2
1
1
1
1
To replace the component, reverse the removal procedure.
Removing and replacing the cartridge rail cards
Perform one of the following procedures depending on the configuration of your system:
•
Remove and replace the cartridge rail cards in a PCIe system
on page 35
•
Remove and replace the cartridge rail cards in a PXIe system
on page 37
Remove and replace the cartridge rail cards in a PCIe system
Procedure
1.
on page 23).
2.
3.
Removing and replacing the cartridge
on page 32).
4.
Remove the access panel (
Removing the PCIe access panel
on page 23).
Removing and replacing the cartridge rail cards
35
Summary of Contents for Edgeline EL4000
Page 18: ...18 Customer self repair ...
Page 19: ...Customer self repair 19 ...
Page 20: ...20 Customer self repair ...
Page 65: ...wireless wide area network Acronyms and abbreviations 65 ...
