10-17
Parameters
None
Description
Use the
ip unreachables enable
command to enable the sending of ICMP destination unreachable
packets.
Use the
undo ip unreachables
command to disable sending ICMP destination unreachable packets.
Sending ICMP destination unreachable packets is disabled by default.
Examples
# Enable sending ICMP destination unreachable packets.
<Sysname> system-view
[Sysname] ip unreachables enable
reset ip statistics
Syntax
reset ip statistics
[
slot
slot-number
]
View
User view
Default Level
2: System level
Parameters
slot
slot-number
: Clears IP packet statistics on the specified device. If the device is in an IRF, the
slot-number
argument represents the member ID of the device; if the device is not in any IRF, the
slot-number
argument represents the device ID.
Description
Use the
reset ip statistics
command to clear statistics of IP packets.
Related commands:
display ip interface
(in
IP Addressing Commands
of the
IP Services Volume
),
display ip statistics
.
Examples
# Clear statistics of IP packets.
<Sysname> reset ip statistics
reset tcp statistics
Syntax
reset
tcp
statistics
Summary of Contents for E4510-48G
