HP E2492A, Installation Manual

Page: 8 / 33

To disassemble the slot 2 S.E.C. cartridge
The slot 2 S.E.C. cartridge consists of a thermal plate, skirt, cover, and
processor card. The thermal plate, skirt, and cover must be removed to
access the processor card.
Detailed instructions for disassembling the slot 2 S.E.C. cartridge can be
obtained from Intel. The following procedures are only intended as an
overview.
Disassembling the S.E.C. cartridge voids the Intel warranty. Also, there is a high
probability that the cover and thermal plate will be destroyed during
disassembly, and a small possibility that the processor card will be destroyed.
The S.E.C. cartridge is not intended to be reassembled after disassembly.
1 Remove the slot 2 S.E.C. cartridge from the target system by pushing in the
two tabs on top of the cartridge, then pulling the cartridge up.
Removing the S.E.C. Cartridge
To disassemble the slot 2 S.E.C. cartridge
7