HP E1433A, User Manual, Page: 201 / 222

Performance Benchmarks
Because these performance benchmarks depend on the
software and hardware configuration, they are
included as supplemental, non-warranted
characteristics.
VXI Data Transfer Rate (P1 connector)
From HP E1433A DRAM to VXI V743 Controller 6.5 MB/s
From HP E1433A DRAM to MXI to external
HP Series 700 Controller
1.5 MB/s
From HP E1433A DRAM to VXLink interface 345 kB/s
From HP E1433A DRAM to E6233A Pentium Controller 1.6 MB/s
From HP E1433A DRAM to National MXI-2 to external
200 MHz Pentium Pro
1.2 MB/s
Local Bus Data Transfer Rate
From HP E1433A DRAM, one block, during
continuous acquisition.
From HP E1433A’s DRAM to HP E1562D
From HP E1433A’s DRAM to HP E1562E
15.7 MB/s
5 MB/s to 7.8 MB/s
10 MB/s to 15.7 MB/s
Maximum number of input channels for continuous
throughput at 196 kSa/s sample rate
40 channels
FIFO Memory
(Maximum FIFO size, 4MB DRAM installed)
(Maximum FIFO size, 32 MB DRAM installed)
2 MSa/number active channels (standard)
16 MSa/number active channels (opt. ANC)
Specification Note
Specifications describe warranted
performance over the temperature
range of 0° to 50°C, after a
15-minute warm-up from ambient
conditions. Supplemental
characteristics identified as
“typical”, provide useful
information by giving
non-warranted performance
parameters. Typical performance
is applicable from 20° to 30°C.
Abbreviations
Fs = sample rate of ADC.
Fc = cut off frequency of high pass
or low pass filters.
dBfs = dB relative to full scale
amplitude range.
dBc = dB relative to carrier
amplitude.
Typical = typical, non-warranted,
performance specification included
to provide general product
information.
Warranty Information
The HP E1433A comes with a 3-yr
warranty. During that period, the
unit will either be replaced or
repaired, at HP’s option, and
returned to the customer without
charge. There is an option avail-
able at extra cost which extends
the repair support to five years.
For More Information
www.hp.com/go/data_acq
HP E1432/33/34A
Product Overview
5965-9834E
For more information on Hewlett-Packard
test & measurement products, applications,
services, and for a current sales office listing,
visit our web site, http://www.hp.com/go/tmdir.
You can also contact one of the following
centers and ask for a test and measurement
representative.
United States:
Hewlett-Packard Company
Test and Measurement Call Center
P.O. Box 4026
Englewood, CA 90155-4026
1 800 452 4844
Canada:
Hewlett-Packard Canada Ltd.
5150 Spectrum Way
Mississauga, Ontario
L4W 5G1
Tel: (905) 206 4725
Europe:
Hewlett-Packard
European Marketing Centre
P.O. Box 999
1180 AZ Amstelveen
The Netherlands
Tel: (31-20) 547-9900
Japan:
Hewlett-Packard Japan Ltd.
Measurement Assistance Center
9-1, Takakura-Cho, Hachioji-Shi,
Tokyo 192, Japan
Tel: (81-426) 56-7832
Fax: (81-426) 56-7840
Latin America:
Hewlett-Packard
Latin American Region Headquarters
5200 Blue Lagoon Drive 9th Floor
Miami, Florida 33126 U.S.A.
Tel: (305) 267-4245/4220
Fax: (305) 267-4288
Australia/New Zealand:
Hewlett-Packard Australia Ltd.
31-41 Joseph Street
Blackburn, Victoria 3130
Australia
Tel: 1 800 629 485
Asia Pacific:
Hewlett-Packard Asia Pacific Ltd
17-21/F Shell Tower, Times Square,
1 Matheson Street, Causeway Bay,
Hong Kong
Tel: (852) 2599-7777
Fax: (852) 2506-9285
Data is subject to change
Copyright  1996, 1997, 1999 Hewlett-Packard Co.
Printed in USA 4/99
5963-9652E
H
12 of 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com