HP E1433A, User Manual, Page: 193 / 222

Input
Full Scale Input Ranges
(in volts peak)
5 mV to 10 V (1, 2, 5 steps)
Maximum Input Level
42 Vp
Input Impedance
(dc coupled or ac coupled above 10 Hz)
Differential
Either side-to-chassis
2 M Ω nominal
1 M Ω nominal
Programmable AC Coupling 3 dB Corner Frequency
(2 pole, 12 dB/oct.)
1 to 100 Hz
Common Mode Rejection Ratio
ac or dc coupled, 10 Hz to 1 kHz
Maximum signal, low side to chassis
Maximum signal, high side to chassis (V
T
= 0)
Maximum signal, high side to chassis
> 70 dB
± 10 Vpk
± 11.5 Vp
VT ± 10 Vpk (must be ≤ 20 V)
(V
T
= transducer offset cancellation voltage setting)
Amplitude Over-Range Detection
Common mode overload
Differential mode overload (dc coupled)
Differential mode overload (ac coupled)
for cutoff frequency ≤ 6 Hz
for cutoff frequency > 6 Hz
± 11.5 Vp (typical)
105% of full scale
100% of full scale
50% of full scale, worst case
Residual DC
1% of full scale + 2 mV
Amplitude
Amplitude Accuracy at 1 kHz
± 0.5% of reading, ± 0.01% of full scale
Flatness (relative to 1 kHz, at full scale)
< 29 kHz
< 88 kHz
± 1% (± 0.09 dB)
± 2% (± 0.17 dB)
Amplitude Resolution
16 bits, less 5 dB over-range
Cross Channel Matching (any HP E1433A module in the same mainframe)
Cross Channel Amplitude Match
(full-scale signal, input ranges equal)
up to 29 kHz
29 khz to 88 kHz
± 0.1 dB
± 0.2 dB
Cross Channel Phase Match
(full-scale signal, input ranges equal)
ac coupled
(freq > 2x AC HPF corner freq)
to 750 Hz
750 Hz to 88 kHz
dc coupled
10 Hz to 88 kHz
at 1 kHz
± 0.9
°
± (f/22000)
°
± (f/22000)°
± 0.045°
4 of 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com