HP E-MSM720, Installation Manual, Page: 23 / 55

2-9
Installing the E-MSM720
Installation Procedures
Attach the rubber feet to the four corners on the bottom of the E-MSM720
within the embossed angled lines. Use a sturdy surface in an uncluttered area.
You may want to secure the networking cables and E-MSM720 power cord to
the table leg or other part of the surface structure to help prevent tripping over
the cords.
C a u t i o n
Ensure the air flow is not restricted around the sides and back of the E-
MSM720.
Using a Kensington Security Cable
To prevent unauthorized removal of the E-MSM720, you can use a Kensington
Slim MicroSaver security cable (not included) to attach the E-MSM720 to an
immovable object.
Figure 2-6. Using a Security Cable
4. Connect the E-MSM720 to a Power Source
1. Plug the AC/DC adapter’s power cord into the E-MSM720, and then plug
the AC/DC power adapter into a nearby AC power source.
2. Re-check the LEDs during self test. See “LED Behavior” on page 2-5 .
3. For the E-MSM720, use the included cable tie to secure the power cord to
the E-MSM720.