HP E-MSM720, Installation Manual, Page: 22 / 55

2-8
Installing the E-MSM720
Installation Procedures
Wall or Under-Table Mounting
You can mount the E-MSM720 on a wall with either the front or rear panel
facing up.
W A R N I N G
The network ports must be facing up. Do not mount the E-MSM720
with ports facing down.
C a u t i o n
The E-MSM720 should be mounted only to a wall or wood surface that is at
least 1/2-inch (12.7 mm) plywood or its equivalent.
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the E-MSM720 with the included 8-mm M4 screws.
2. Attach the E-MSM720 to the wall or wood surface with two 5/8-inch
number 12 wood screws (not included).
Figure 2-5. Wall Mounting the E-MSM720
Horizontal Surface Mounting
Place the E-MSM720 on a table or other horizontal surface. The E-MSM720
comes with rubber feet in the accessory kit that can be used to help keep the
E-MSM720 from sliding on the surface.
Wall
5/8-inch
wood screws
RJ-45 Ports