manualshive.com logo in svg

HP Deskpro AP230, Supplementary Manual, Page: 12 / 36

Share
Download
HP Deskpro AP230 Supplementary Manual Download Page 12

8

    Desktop Management Guide

Compaq Confidential - Need to Know Required

Writer:

 Holly Jahangiri 

Part Number:

 177919-001 

File Name:

 4-dm-ch1.doc

Last Saved On:

 3/14/2000 1:32 PM 

Last Saved By:

 Lydia Sanchez

Entering a Setup Password

If a setup password has been established on the Computer, you will be
prompted to enter it each time you run Computer Setup.

1.  Turn on or restart the Computer. If you are in Windows, click Start

à

 Shut Down 

à

 Restart the Computer.

2.  When the F10=Setup message appears in the lower-right corner of

the screen, press the F10 key.

If you do not press the F10 key while the message is
displayed, you must restart the computer again to access
the utility.

3.  When the key icon appears on the monitor, type the setup

password, then press the Enter key.

Type carefully; for security reasons, the characters you
type do not appear on the screen.

If you enter the password incorrectly, a broken key icon appears. Try
again. After three unsuccessful tries, you must turn off the Computer,
then turn it on again before you can continue.

Summary of Contents for Deskpro AP230





































Reviews:

No comments