2-8
Hardware Upgrades
Compaq Confidential - Need to Know Required
Writer: M. Church Part Number: 212399-001 File Name: e-ch02.doc
Last Saved On: 09/07/00 2:03 PM Last Saved By: Integrity Group
To install a memory module:
1. Turn off the workstation and any external devices, then disconnect
the power cord from the grounded AC outlet.
On a power-managed system, the power cord must be
disconnected from the grounded AC outlet.
2. Remove the workstation access panel and locate the RIMM
sockets.
CAUTION:
Be sure to follow the correct configuration guidelines to
your respective memory board, or your system will not function.
3. Refer to the following illustration to install a RIMM module.
Installing a RIMM module
4. Reassemble the workstation.
Removing RIMMs
To remove a memory module from a RIMM socket, reverse the
procedures in the previous section.
