manualshive.com logo in svg

HP DesignJet 500, Maintenance And Service Manual, Page: 71 / 117

Share
Download
HP DesignJet 500 Maintenance And Service Manual Download Page 71

Select

To Do This

port to the computer or to an optional docking device (select models
only).

●

Automatic/disable Intel SpeedStep Technology.

●

Select a parallel port mode: EPP (Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced Capabilities Port).

●

Enable/disable BIOS DMA data transfers (select models only)

●

Enable/disable the system fan when connected to an AC outlet.

●

Enable/disable Intel or AMD PSAE Execution Disable. When enabled,
the processor can disable some virus code execution, which helps to
improve computer security.

●

Enable/disable LAN Power Save. When enabled, saves power by
turning off the LAN when not in use.

●

Enable/disable SATA Native Support.

●

Enable/disable Dual Core CPU.

●

Enable/disable Secondary Battery Fast Charge.

Built-in Device Options

●

Enable/disable embedded WWAN Device Radio.

●

Enable/disable embedded WLAN Device Radio

●

Enable/disable embedded Bluetooth® Device Radio.

●

Enable/disable LAN/WLAN Switching. When enabled, switches to a
WLAN when a LAN is either unavailable or disconnected.

●

Enable/disable Wake on LAN from Off.

●

Enable/disable the ambient light sensor.

Port Options

●

Enable/disable the serial port.

●

Enable/disable the parallel port.

●

Enable/disable the flash media reader.

●

Enable/disable the USB port.

CAUTION

Disabling the USB port also disables MultiBay

devices and ExpressCard devices on the advanced port
replicator.

●

Enable/disable the 1394 port.

●

Enable/disable the cardbus slot.

●

Enable/disable the ExpressCard slot.

●

Enable/disable the infrared port.

66

Chapter 6   Computer Setup

ENWW

Summary of Contents for DesignJet 500






















































































































Reviews:

No comments