manualshive.com logo in svg

HP D5063H - Pavilion F50 - 15" LCD Monitor, User Manual, Page: 8 / 56

Share
Download
HP D5063H - Pavilion F50 - 15

hp pavilion f1503/f1703 LCD Monitor
What the f1703 Monitor Offers

8

English

 

What the f1703 Monitor Offers

The HP f1703 monitor is a liquid crystal display (LCD) 17-inch, high 
resolution, multi-synchronous color monitor. 

Multi-synchronous

 means 

that the monitor can use a range of video modes. It is optimized for 
use with HP computers.

The HP f1703 monitor has the following features:

•  A 17-inch LCD; thin film transistor (TFT) with an anti-glare surface
•  Support of video modes up to 1280 x 1024 at a 75 Hz 

refresh rate

• Analog VGA interface connector for connecting to the computers
•  True color (16 million colors)
•  Adjustable pedestal for positioning the tilt and level of the monitor 

screen

•  Auto-adjustment of display position, clock, and phase for the VGA 

interface

•  An On Screen Display (OSD) manager that allows you to adjust 

settings through onscreen menus

Slim and space

saving

Full scan TFT screen

that gives an

edge-to-edge image

Anti-glare

surface

On/Off switch

Menu button

Browse buttons

Auto/Select button

Summary of Contents for D5063H - Pavilion F50 - 15" LCD Monitor

























































Reviews:

No comments