manualshive.com logo in svg

HP D5063H - Pavilion F50 - 15" LCD Monitor, User Manual, Page: 25 / 56

Share
Download
HP D5063H - Pavilion F50 - 15

hp pavilion f1503/f1703 LCD Monitor
Adjusting the Monitor Settings

25

English

 

Adjusting the Monitor Settings

The monitor display has several adjustable settings that may need 
occasional fine-tuning. Adjust the monitor after:
•  Installing the monitor for the first time.
•  Changing the resolution (number of pixels on the display) or 

refresh rate (vertical scan frequency rate).

•  Changing the graphic card.
•  Connecting the monitor to a different computer.
•  Using the Factory Settings function. See “Using the Factory settings 

option” on page 35.

NOTE:

For best performance, it is recommended that you select a 

video mode of 1024 x 768 @ 60 Hz for the f1503 monitor 

and 1280 x 1024 @ 60 Hz for the f1703 monitor on the 

computer.

Using the On Screen Display

The monitor comes pre-configured to provide the best viewing 
image. However, you can fine-tune the display by using On Screen 
Display (OSD). The monitor control buttons allow you to open the On 
Screen Display to select and adjust display settings.

Summary of Contents for D5063H - Pavilion F50 - 15" LCD Monitor

























































Reviews:

No comments