D-2
www.hp.com
Hardware Reference Guide
Electrostatic discharge
Grounding methods
There are several methods for grounding. Use one or more of
the following methods when handling or installing
electrostatic-sensitive parts:
■ Use a wrist strap connected by a ground cord to a grounded
Thin Client chassis. Wrist straps are flexible straps with a
minimum of 1 /- 10 percent resistance in the ground
cords. To provide proper grounding, wear the strap snug against
the skin.
■ Use heelstraps, toestraps, or bootstraps at standing workstations.
Wear the straps on both feet when standing on conductive floors
or dissipating floor mats.
■ Use conductive field service tools.
■ Use a portable field service kit with a folding static-dissipating
work mat.
If you do not have any of the suggested equipment for proper
grounding, contact an HP authorized dealer, reseller, or service
Provider.
For more information about static electricity, contact an HP
authorized dealer, reseller, or service provider.
!
