HP Compaq t5515, Administrator'S Manual

Page: 24 / 100

2-6
www.hp.com
Administrator’s Guide
HP Connection Administrator
Configuring connections as primary, secondary,
or to auto connect
Use the following procedure to configure connections in the
Advanced Configuration utility.
■
You can designate connections as primary or secondary. A
primary connection is the first attempted in a group of
connections. Secondary connections are attempted if the primary
connection fails, and attempt to connect in their listed order. You
can assign several primary connections, each with several
associated secondary connections.
■
You can set primary connections to automatically connect when
HP Connection Administrator starts up.
■
You can set primary connections to automatically reconnect if the
connection is lost.
To configure connections:
1. In the HP Connection Administrator, click the Advanced button
to access the Advanced Configuration utility.
2. Under User Connections , select the appropriate user.
3. Select the connection in the user's connection list that you want to
modify.
4. If you want to make a connection a primary connection:
a. In the Primary column, select the check box.
b. To assign a secondary connection to the primary connection,
clear the check box in the
Primary column that you want to
be the secondary connection. The connection becomes a
secondary connection to the first primary connection directly
above the secondary connection in the list.
c. To arrange the connections in the order that you want them to
connect, select a connection and click the
Up and Down
buttons to move the connection. Secondary connections are
always associated with the first primary connection above
them in the list.
d. Click Save to save your changes.