background image

Compaq Global Mini PCI 56k (V.90) Modem by 3Com

2

White Paper

0203-0799-A

Notice

The information in this guide is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE
OF THIS MATERIAL.

This guide contains information protected by copyright. No part of this guide may be photocopied or
reproduced in any form without prior written consent from Compaq Computer Corporation.

C

OMPAQ 

and A

RMADA

 are registered in the U.S. Patent and Trademark Office.

Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

The software described in this guide is furnished under a license agreement or nondisclosure agreement.
The software may be used or copied only in accordance with the terms of the agreement.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective
companies.

Copyright ©1999 Compaq Computer Corporation. All rights reserved. Printed in the U.S.A.

Modem Commands Document

Compaq V.90 Integrated Modem Commands
White Paper prepared by Portable Marketing Services

First Edition (July 1999)
Document Number 0203-0799-A

Summary of Contents for Compaq Presario


































Reviews: