HP Compaq Presario,Presario 650 Page 21 Maintenance And Service Manual Download

Page: 21 / 111

Left side

Item

Component

Description

(1)

External monitor port

Connects an external VGA monitor or projector.

(2)

Vents (2)

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.

(3)

RJ-45 (network) jack

Connects a network cable.

(4)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, any compatible digital or
audio device.

(5)

USB port

Connects an optional USB device.

(6)

Audio-in (microphone) jack

Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.

(7)

Audio-out (headphone) jack

Connects optional powered stereo speakers,
headphones, earbuds, a headset, or a television
audio cable.

WARNING!

To reduce the risk of personal injury,

adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information,
refer to the

Regulatory, Safety, and Environmental

Notices

NOTE:

When a device is connected to the jack,

the computer speakers are disabled.

Chapter 2 External component identification

Summary of Contents for Compaq Presario,Presario 650
















































































































Search results

Summary of Contents for Compaq Presario,Presario 650

Reviews:

Related manuals for Compaq Presario,Presario 650

Brands by name

Popular brands

HP Compaq Presario,Presario 650, Maintenance And Service Manual

Search results

Summary of Contents for Compaq Presario,Presario 650

Reviews:

Related manuals for Compaq Presario,Presario 650

Brands by name

Popular brands