HP Compaq Presario,Presario 1910, User Manual

Page: 178 / 578

165
Table 44 Configuration items
Item Description
Select VLAN Interface
Select the VLAN interface to be configured.
The VLAN interfaces available for selection in the list are those created on the page
for creating VLAN interfaces.
Modify
IPv4
Address
DHCP Configure the way in which the VLAN interface gets an IPv4 address.
Allow the VLAN interface to obtain an IP address automatically by selecting the
DHCP
or BOOTP option, or manually assign the VLAN interface an IP address by selecting
the Manual option. In the latter case, you need to set the mask length or enter a mask
in dotted decimal notation format.
BOOTP
Manual
Admin
Status
Select Up or Down in the Admin Status list to bring up or shut down the selected VLAN
interface.
When the VLAN interface fails, you can shut down and then bring up the VLAN
interface, which might restore the VLAN interface.
By default, a VLAN interface is down if all Ethernet ports in the VLAN are down;
otherwise, the VLAN interface is up.
NOTE:
•
The current VLAN interface state in the Modify IPv4 Address and Modify IPv6
Address frames changes as the VLAN interface state is modified in the Admin
Status list.
• The state of each port in the VLAN is independent of the VLAN interface state.